Filter
Top Products
Troubleshooting Vectors
D-8 Issue 4 September 1995
messaging split
Vector stuck (with ringback). Extension unknown to AUDIX.
Step skipped, no message left. AUDIX link down.
DCS link to remote AUDIX down.
All DCS trunks busy.
Queue for AUDIX voice ports is
full.
Vector stuck (with busy). Remote AUDIX link down.
Messages not found. Message extension is
none
(message is left for VDN that
accessed the vector).
Delay before AUDIX answers. All AUDIX ports busy, but space
in queue.
Busy tone. Queue for AUDIX voice ports is
full.
Step skipped. Split not AUDIX split anymore.
route-to
Step skipped (that is, default
treatment).
Invalid local extension.
No trunks available.
COR/FRL restricted.
Digit string inconsistent with
networking translation.
Busy local destination (route to
digits without coverage and
route to number).
No digits collected.
Network reorder. Digit string inconsistent with
public network translation.
Intercept or reorder tone
heard.
Vector processing succeeded
routing off switch, but a problem
has occurred before routing to its
final destination.
All trunks busy on a quiet
system.
Two switches treating each other
as a backup switch.
stop
Call dropped. Call not queued when vector
processing stops.
NOTE:
Complete operation details for the
route to
commands are presented in
Appendix G.
Table D-2. Unexpected Command Operations
Command Step Customer Observation(s) Cause(s)