Filter
Top Products
Call Vectoring Commands
A-82 Issue 4 September 1995
Table A-11. Call Vectoring Command Success/Failure Criteria
Command Success/Failure Criteria
Vector Processing
Disposition
adjunct routing
Fails if any of the following are true:
■ VDN’s COR does not permit routing to
the adjunct-supplied destination.
■ TAC/ARS/AAR code is invalid.
■ Specified agent is not logged into the
specified split for a direct agent call.
■ Local extension is not in the dialplan.
■ Invalid number was dialed.
Stop
wait-time
or
announcement
step
(if present). Then
continue vector
processing with the
next sequential step.
Otherwise, succeeds. Route the call and
provide feedback.
announcement
Fails if specified announcement is
unadministered, not recorded, or busied
out.
Continue vector
processing with the
next sequential step.
Otherwise, succeeds. Play the
announcement, then
continue at the next
sequential step.
busy
Always succeeds. (CO without answer
supervision trunk callers will not hear the
busy tone.)
Exit vector
processing, then
play the busy tone
for 45 seconds before
dropping the call.
(Unanswered CO
trunk calls receive 45
seconds of ringback.)