Filter
Top Products
Command Job Aid
Issue 4 September 1994
A-11
7. Even numbers only.
8. Active means the called VDN as changed by VDN override. Latest means the VDN assigned to the
vector in which the call is currently being processed.
9. The Call Prompting feature must be enabled.
1. The “goto vector” command is identical to the “goto step” command, except the word step is replaced
by the word vector. The valid values for vector are: 1-48 [G3vs/s], 1-256 [G3i], 1-512 {G3r].
2. The Vectoring (G3V4 Advanced Routing) and Vectoring (G3V4 Enhanced) options must be enabled.
3. The <=, >=, <>, and = comparators are new for G3V4. <= means less than or equal to, >= means
greater than or equal to, <> means not equal to, and = means equal to.
4. The Vectoring (ANI/II-Digits Routing) and Vectoring (G3V4 Enhanced) options must be enabled.
5. A ? matches any digit 0-9 in that single digit position. A + matches any or no characters.
6. Even numbers only.
7. This command is also available with Call Prompting.
Table A-8. Vectoring Commands — Generic 3 Version 4
(continued)
goto step
1
____ if expected-wait
2
call _____ _____
(1-32) for (<, <=)
3
(1-9999)
(>, >=, <>, =) (0-9999)
ii-d
igits
4
_____ table _____
(in, not-in) (1-5 [G3vs/s])
(1-10 [G3i])
(1-100 [G3r])
ii-digits
4
_____ _____
(<, >, <=, >=) (00-99)
(<>, =) [00-99, +, +?, ?+, ??, ?x (where x = 0-9), x?, none]
5
oldest-call-wait ______ pri __ _____ _____
in split (1-24 [G3vs/s]) (low, med, (<, <=) (2-998)
6
1-99 [G3i]) high, top) (>, >=, <>, =) (0-998)
6
(1-255 [G3r])
staffed-agents _____ _____ _____
in split (1-24 [G3vs/s]) (<, <=) (1-150 [G3vs/s], 1-200 [G3i],, 1-999 [G3r])
(1-99 [G3i]) (>, >=, <>, =) (0-149 [G3vs/s], 0-199 [G3i], 0-998 [G3r])
1-255 [G3r])
time
-of-day is _____ _____ to _____ _____
(mon, tue, (hh:mm in (mon, tue, (hh:mm in military
wed, thu, fri, military time) wed, thu, fri, time)
sat, sun, all) sat, sun, all)
unconditionally
7