Filter
Top Products
Polycom RealPresence DMA System SNMP Support
Polycom, Inc. 425
Download MIBs
You can download any of the Polycom MIBs from the SNMP Settings page. Polycom recommends using a
MIB browser to explore the DMA system MIB. The DMA system MIB is self-documenting, including
information about the purpose of specific traps and inform notifications.
To download the MIB package for a DMA system
1 Go to Admin > SNMP Settings.
2 Click Download MIBs.
3 In the MIBs dialog box, select the MIB of interest and click Download.
4 Specify a name and location, and click Save.
See Available SNMP MIBs on page 425 for a description of the available MIBs on the DMA system.
Available SNMP MIBs
The following table describes the MIBs that are on the Polycom DMA system.
Name Description
Polycom-specific
JVM-MANAGEMENT-MIB MIB for monitoring the state of the Java Virtual Machine.
POLYCOM-BASE-MIB Base MIB for Polycom products.
POLYCOM-DMA-MIB RealPresence DMA system-specific MIB.
POLYCOM-MCU-MANAGEMENT-MI
B
MIB for monitoring MCUs in use with the system.
RFC1213-MIB RFC1213 MIB definitions included for reference. The RealPresence DMA
system supports all but egp.
SNMPv2-CONF A definition file for standard conventions included for reference.
SNMPv2-SMI A definition file for standard conventions included for reference.
SNMPv2-TC A definition file for standard conventions included for reference.
Third-Party
MIB-Dell-10892 The primary MIB for the Polycom-branded Dell server. It provides 36 traps
from the server motherboard, including system type, voltages, and
temperature readings. For more information, see the Dell SNMP
documentation.
Note: This MIB, while visible on both the Appliance and Virtual Edition,
only provides meaningful data when used with the Appliance Edition.