Filter
Top Products
Polycom, Inc. 344
Alert 1105
<alerting-cluster>: Primary cluster <p-cluster> and backup cluster <b-cluster> are
not reachable. Territory <territory> may not be functioning.
The cluster from which the alert originated is unable to communicate with the specified territory’s primary
and backup clusters.
This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is
once again able to communicate with the clusters in question.
If this alert reoccurs frequently but quickly goes away, that suggests intermittent spurious network problems.
If it persists for more than about 15-30 seconds, it may indicate serious network problems. It’s also possible
that someone shut both clusters down, or shut down one and the other then failed, or both failed (unlikely).
Click the link to go to the Territories page. To enable conferencing to continue in the territory (at diminished
capacity), assign it to some other cluster.
See also:
Alerts on page 342
Alert 1106
<alerting-cluster>: Cluster <cluster> is not reachable. Territory <territory> may not
be functioning.
The cluster from which the alert originated is unable to communicate with the specified territory’s primary
cluster, and there is no backup cluster.
This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is
once again able to communicate with the cluster in question.
If this alert reoccurs frequently but quickly goes away, that suggests intermittent spurious network problems.
If it persists for more than about 15-30 seconds, it may indicate serious network problems. It’s also possible
that someone shut the cluster down or that it failed.
Click the link to go to the Territories page. To enable conferencing to continue in the territory (at diminished
capacity), assign it to some other cluster.
We recommend assigning a backup cluster for each territory.
See also:
Alerts on page 342
Alert 1107
<alerting-cluster>: Primary cluster <p-cluster> associated with territory <territory>
is not reachable. But backup cluster <b-cluster> is reachable.
The cluster from which the alert originated is unable to communicate with the specified territory’s primary
cluster, but can communicate with the backup cluster.
This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is
once again able to communicate with the cluster in question.