Filter
Top Products
Conference Manager Configuration
Polycom, Inc. 211
RMX Video Quality
People Video Definition
Video quality Offers two video optimizations:
• Motion — higher frame rate
• Sharpness — higher resolution
Not available if Conference mode is set to SVC only.
Max resolution (v7) Enables you to choose a resolution setting that limits the conference to no
more than that resolution regardless of the line rate and resolution capabilities
of the MCU and endpoints.
Auto (the default) imposes no limit.
Available only on v7 and newer Polycom MCUs.
Not available if Conference mode is set to SVC only.
Video clarity (MPM+ and
MPMx only)
Enables a video enhancement process that improves clarity, edge sharpness,
and contrast on streams with resolutions up to and including SD.
Available only on Polycom MCUs with MPM+ or MPMx cards. Not available if
Video switching is selected.
Not available if Conference mode is set to SVC only.
Auto brightness (v7) Enables automatic balancing of brightness levels to compensate for an
endpoint sending a dim image.
Available only on v7 and newer Polycom MCUs.
Not available if Conference mode is set to SVC only.
Content Video Definition
Content settings The transmission mode for the Content channel:
• Graphics — lowest bit rate for basic graphics
• High-resolution graphics — higher bit rate for better graphics resolution
• Live video — the Content channel is used for live video
• Customized content rate — allows you to specify a Content rate
A higher bit rate for the Content channel reduces the bit rate for the People
channel.
Content rate Bit rate of the content channel. Enabled when the Customized content rate
content setting is selected.
AS SIP content Enables the sharing of content using the AS-SIP protocol security features.
Multiple content
resolutions
Enables content sharing over multiple video streams. When selected, you can
choose which protocols to use for each stream with the Transcode to setting.
Note: Enabled only when:
Conference mode is set to AVC only.
TIP compatibility is set to either None or Video Only.
Transcode to Enables you to choose which protocols to use for each stream of content.
Enabled when the Multiple content resolutions check box is selected.
Note: The H.264 protocol check box is always selected.
Field Description