Filter
Top Products
Call Server Configuration
Polycom, Inc. 252
CALLER_SIP_URI Array variable initially set to the set of SIP URI addresses of the caller. The
length of the array is 0 if the caller doesn’t have a SIP URI address.
CALLER_SITE_AREA
_CODE
Area code of the caller’s site. Blank if the site doesn’t have an area code.
CALLER_SITE_COUNTRY_COD
E
Country code of the caller’s site. Blank if the site doesn’t have a country
code.
CALLER_SITE_DIGITS The number of subscriber number digits in the caller’s site (that is, the length
of a phone number at the site, excluding area code). Blank if the site doesn’t
have a number of digits.
CALLER_SITE_NAME The name of the caller’s site.
CALLER_SITE_SITE
_CODE
The site code of the caller’s site.
CALLER_TEL_URI Array variable initially set to the set of Tel URI addresses of the caller. The
length of the array is 0 if the caller doesn’t have a Tel URI address.
DIAL_STRING Initially set to the dial string being evaluated. If the script modifies the
DIAL_STRING value, the modified value is used as the input to the dial rule
action.
For SIP, when the DIAL_STRING is modified by the script, it’s use depends
on the dial rule action:
Variable Initial value