Filter
Top Products
Integrations with Other Systems
Polycom, Inc. 183
3 When asked to confirm that you want to leave, click Yes.
The system connects to the Polycom RealPresence Resource Manager or CMA system and
terminates the integration. A dialog box informs you when the process is complete.
4 On the Resource Management System page, verify that the system is no longer integrated with
the Polycom RealPresence Resource Manager or CMA system.
The Polycom RealPresence DMA system retains the site topology and user-to-device association
information last obtained from the RealPresence Resource Manager or CMA system, but it’s now
editable.
See also:
Integrations with Other Systems on page 152
Resource Management System Integration on page 178
Resource Management System Page on page 180
Join Resource Management System Dialog Box on page 181
Juniper Networks SRC Integration
You can integrate the Polycom RealPresence DMA system’s Call Server with a Juniper Networks SRC
Series Session and Resource Control module to provide bandwidth assurance services. This allows the
RealPresence DMA system to consult a configured policy on the Juniper SRC system at call time to assure
and/or reserve required network resources for a call. It also allows priority and preemption policies to be
applied to RealPresence DMA system calls.
In addition, the RealPresence DMA system’s priority-based QoS packet marking (Gold/Silver/Bronze class
of service) is applied by the Juniper SRC system throughout the network it controls.
See also:
Integrations with Other Systems on page 152
Juniper Networks SRC Page on page 183
Juniper Networks SRC Integration Procedure on page 184
Juniper Networks SRC Page
The following table describes the fields on the Juniper Networks SRC page.
Field Description
Enable integration with Juniper
Networks® SRC
Enables the SRC integration fields and the Update button, which initiates a
connection to the Juniper Networks SRC server.
IP address or host name The host name or IP address of the SRC server.
Server port The port number used to connect to the SRC server.
Client ID The user ID with which the Polycom RealPresence DMA system logs into the
SRC server.