Filter
Top Products
Integrations with Other Systems
Polycom, Inc. 184
See also:
Juniper Networks SRC Integration on page 183
Juniper Networks SRC Integration Procedure
To configure SRC integration
1 Go to Admin > Integrations > Juniper Networks SRC.
2 Check Enable integration with Juniper Networks® SRC and specify the address of the SRC
server.
3 Specify the login credentials for the system to connect to the SRC server.
4 Specify the subscriber URI of an endpoint known to the SRC server, specified as in this example:
ip:ipAddress=192.168.70.228
This can be any endpoint about which the SRC server will return information when queried to test the
connection.
5 Click Update.
To verify that it can successfully communicate with the SRC server, the Polycom RealPresence DMA
system queries the SRC server about the endpoint you specified and confirms that the query is
successful. A dialog box informs you that the configuration has been updated.
6 Click OK.
See also:
Juniper Networks SRC Integration on page 183
Juniper Networks SRC Page on page 183
Client password The password with which the Polycom RealPresence DMA system logs into
the SRC server.
Subscriber URI The subscriber URI of an endpoint known to the SRC server, specified as in
this example:
ip:ipAddress=192.168.70.228
This can be any endpoint for which the SRC server will return information
when queried to test the connection.
Field Description