Filter
Top Products
Call Server Configuration
Polycom, Inc. 268
See also:
Registration Policy on page 264
Script Debugging Dialog Box for Registration Policy Scripts
When you click Debug this script on the Registration Policy page, the Script Debugging dialog box
appears, in which you can test your script.
The dialog box lets you enter or select test values for the predefined variables (see Registration Policy
Scripting on page 265 for a list of these). Select an Endpoint Site and Subnet to populate the
site/subnet-related fields, which are read-only.
The Script Output box displays any output produced by the script when it runs (e.g., println statements
and error messages). This output is recorded in the registration history.
The Script Result box displays the return value (COMPLIANT or NONCOMPLIANT) from running the script
with the specified test values. If the script assigned a value to the EP_EXCEPTION variable, it also displays
that.
Testing your script is an iterative process. Specify test values for the variables used in your script. Then click
Run Script to see the results of applying the script using those variable values. Repeat as often as
necessary, using different variable values.
If necessary, make changes to your script and then test some more, until you’re satisfied that the script
accomplishes what you intended.
See also:
Registration Policy on page 264
Registration Policy Scripting on page 265
Sample Registration Policy Scripts
A registration policy script is an executable script, written in the Javascript language, that defines the criteria
to be applied to registration requests in order to determine what to do with them. For each request
evaluated, the script must return COMPLIANT or NONCOMPLIANT. See Registration Policy Scripting on
page 265 for more information.
REG_SUBNET_IP_ADDRESS IP address of the subnet where the endpoint is attempting to
register. Enter it here in normal dot or colon notation (such as
1.2.3.4 for IPv4).
In the script, this is represented as an array. If the IP address
is IPv4, there are 4 elements in the array. If the IP address is
IPv6, there are 8 elements in the array.
REG_SUBNET_MASK IP mask of the subnet where the endpoint is attempting to
register. Enter it here in normal dot or colon notation (such as
1.2.3.4 for IPv4).
In the script, this is represented as an array. If the IP address
is IPv4, there are 4 elements in the array. If the IP address is
IPv6, there are 8 elements in the array.
Variable Initial value