Filter
Top Products
Device Management
Polycom, Inc. 103
See also:
External Gatekeeper on page 101
Script Debugging Dialog Box for Preliminaries/Postliminaries on page 254
Device Authentication on page 261
Edit External Gatekeeper Dialog Box
The following table describes the fields in the Edit External Gatekeeper dialog box.
Prefer routed If selected (the default), the system forces all calls to this gatekeeper to routed
mode.
This setting must be enabled to avoid interoperability issues with Polycom
CMA and Avaya gatekeepers, and possibly others as well.
Authentication Mode In this section, you can configure the system to send its H.235 credentials
when it sends address resolution requests to that gatekeeper.
Enabled Clearing this check box lets you stop sending H.235 credentials to the
external gatekeeper without deleting them.
Name The H.235 name of the Polycom RealPresence DMA system.
Password
Confirm password
The H.235 password for the Polycom RealPresence DMA system.
Algorithm Select the encryption algorithm for H.235 authentication.
LRQ test Click to test the configuration by sending an LRQ message to the external
gatekeeper.
Postliminary A postliminary is an executable script, written in the Javascript language, that
defines dial string transformations to be applied before querying the external
gatekeeper.
Enabled Lets you turn a postliminary on or off without deleting it.
Script Type (or paste) the postliminary script you want to apply. Then click Debug
this script to open the Script Debugging Dialog Box for
Preliminaries/Postliminaries and test the script with various variables.
Column Description
External Gatekeeper
Enabled Clearing this check box lets you stop using an external gatekeeper without
deleting it.
Name Gatekeeper name.
Description The text description displayed in the External Gatekeepers list.
Address Host name or IP address of the gatekeeper.
Column Description