Filter
Top Products
Site Topology
Polycom, Inc. 300
d Select the first site linked to this cloud and click the arrow button to move it to the Linked Sites list.
The Add Site Link dialog box appears.
e Define the link. See Add Site Link Dialog Box on page 292.
f Repeat the previous two steps for each additional site linked to this cloud.
g Click OK.
8 Go to Network > Site Topology > Site-to-Site Exclusions, and for each exclusion in your network
topology, do the following:
a In the Actions list, click Add.
b Complete the Add Site-to-Site Exclusions wizard. See Add Site-to-Site Exclusion Wizard on
page 293.
Your site topology information is complete. For a conference with cascading for bandwidth enabled, the
Polycom RealPresence DMA system can use it to route calls to the nearest eligible MCU (based on pools
and pool orders) that has available capacity and to create the cascade links between MCUs.
See also:
About Site Topology on page 278
Note: Resource Management System Integration Replaces Data
If in the future you integrate this system with a Polycom RealPresence Resource Manager or CMA
system, the site topology information from the Polycom RealPresence Resource Manager or CMA
system will replace the information you entered.