Filter
Top Products
Configuration and Use Manual 1
Startup Using ProLink IITransmitter User InterfaceBefore You Begin
Chapter 1
Before You Begin
1.1 Overview
This chapter provides an orientation to the use of this manual, and includes a configuration overview
flowchart and a pre-configuration worksheet. This manual describes the procedures required to start,
configure, use, maintain, and troubleshoot the Micro Motion
®
Model 2400S transmitter for
PROFIBUS-DP (the Model 2400S DP transmitter).
If you do not know what transmitter you have, see Section 1.3 for instructions on identifying the
transmitter type from the model number on the transmitter’s tag.
Note: Information on configuration and use of Model 2400S transmitters with different I/O options is
provided in separate manuals. See the manual for your transmitter.
1.2 Safety
Safety messages are provided throughout this manual to protect personnel and equipment. Read each
safety message carefully before proceeding to the next step.
1.3 Determining transmitter information
Transmitter type, user interface option, and output options are encoded in the model number located
on the transmitter tag. The model number is a string of the following form:
2400S*X*X******
In this string:
•
2400S identifies the transmitter family.
•The first
X (the seventh character) identifies the I/O option: D = PROFIBUS-DP
• The second
X (the ninth character) identifies the user interface option:
-
1 = Display with glass lens
-
3 = No display
-
4 = Display with non-glass lens