Filter
Top Products
48 Micro Motion
®
Model 2400S Transmitters for PROFIBUS-DP
Using the Transmitter
With ProLink II
The totalizer and inventory control functions available with ProLink II are listed in Table 7-6. Note
the following:
• ProLink II does not support separate resetting of the API volume totalizer and API volume
inventory. To reset these, you must reset all totalizers or all inventories.
• By default, the ability to reset inventories from ProLink II is disabled. To enable it:
a. Click
View > Preferences.
b. Check the
Enable Inventory Totals Reset checkbox.
c. Click
Apply.
To start or stop all totalizers and inventories:
1. Click
ProLink > Totalizer Control or ProLink > ED Totalizer Control (if the enhanced
density application is enabled).
2. Click the All Totals
Start or All Totals Stop button.
Note: The All Totals functions are replicated in these two windows for convenience. You can start or
stop all totalizers and inventories from either window.
To reset all totalizers:
1. Click
ProLink > Totalizer Control or ProLink > ED Totalizer Control (if the enhanced
density application is enabled).
2. Click the All Totals
Reset button.
To reset all inventories:
1. Click
ProLink > Totalizer Control or ProLink > ED Totalizer Control (if the enhanced
density application is enabled).
2. Click the All Totals
Reset Inventories button.
Table 7-6 Totalizer and inventory control functions supported by ProLink II
Inventory reset
Object Function Disabled Enabled
Totalizers and
inventories
Starting and stopping as a group ✓✓
Totalizers Resetting all ✓✓
Resetting mass totalizer separately ✓✓
Resetting volume totalizer separately ✓✓
Resetting enhanced density totalizers separately ✓✓
Resetting API volume totalizer separately Not supported Not supported
Inventories Resetting all ✓
Resetting mass inventory separately ✓
Resetting volume inventory separately ✓
Resetting enhanced density inventories separately ✓
Resetting API volume inventory separately Not supported Not supported