Filter
Top Products
30 Micro Motion
®
Model 2400S Transmitters for PROFIBUS-DP
Required Transmitter Configuration
6.3.1 Mass flow units
The default mass flow measurement unit is
g/s. See Table 6-2 for a complete list of mass flow
measurement units.
6.3.2 Volume flow units
The default volume flow measurement unit is
l/s (liters per second).
Two different sets of volume flow measurement units are provided:
• Units typically used for liquid volume – see Table 6-3
• Units typically used for gas standard volume – see Table 6-4
If you are using ProLink II or the display, only liquid volume flow units are listed by default. To
access the gas standard volume flow units, you must first configure the volume flow type: liquid or
gas standard.
If you want to measure gas standard volume flow, additional configuration is required. See Section 8.2
for more information.
Table 6-2 Mass flow measurement units
Mass flow unit
Unit descriptionDisplay ProLink II EDD label EDD code
G/S g/s g_per_s 1318 Grams per second
G/MIN g/min g_per_min 1319 Grams per minute
G/H g/hr g_per_hr 1320 Grams per hour
KG/S kg/s kg_per_s 1322 Kilograms per second
KG/MIN kg/min kg_per_min 1323 Kilograms per minute
KG/H kg/hr kg_per_hr 1324 Kilograms per hour
KG/D kg/day kg_per_day 1325 Kilograms per day
T/MIN mTon/min t_per_min 1327 Metric tons per minute
T/H mTon/hr t_per_hr 1328 Metric tons per hour
T/D mTon/day t_per_day 1329 Metric tons per day
LB/S lbs/s lb_per_s 1330 Pounds per second
LB/MIN lbs/min lb_per_min 1331 Pounds per minute
LB/H lbs/hr lb_per_hr 1332 Pounds per hour
LB/D lbs/day lb_per_day 1333 Pounds per day
ST/MIN sTon/min Ston_per_min 1335 Short tons (2000 pounds) per minute
ST/H sTon/hr Ston_per_hr 1336 Short tons (2000 pounds) per hour
ST/D sTon/day Ston_per_day 1337 Short tons (2000 pounds) per day
LT/H lTon/hr Lton_per_hr 1340 Long tons (2240 pounds) per hour
LT/D lTon/day Lton_per_day 1341 Long tons (2240 pounds) per day