Filter
Top Products
Configuration and Use Manual 59
Optional Configuration
Required Configuration Optional ConfigurationUsing the TransmitterUsing a PROFIBUS Host Required Configuration Optional ConfigurationUsing the TransmitterUsing a PROFIBUS Host Required Configuration Optional ConfigurationUsing the TransmitterUsing a PROFIBUS Host Required Configuration Optional ConfigurationUsing the TransmitterUsing a PROFIBUS Host
Reset ED net mass total RESET NET M Reset ED Net
Mass Total
Resets the value of the ED net mass totalizer to 0
(4)
Reset ED net vol total RESET NET V Reset ED Net
Volume Total
Resets the value of the ED net volume totalizer to 0
(4)
Reset all totals RESET ALL Reset All
Total s
Resets the value of all totalizers to 0
Start/stop all totalization START STOP Start/Stop All
Total s
If totalizers are running, stops all totalizers
If totalizers are not running, starts all totalizers
Increment current ED
curve
INCR CURVE Increment ED
Curve
Changes the active enhanced density curve from
curve 0 to curve 1, from 1 to 2, etc.
(4)
Start meter verification START VERFY Start Meter
Verification
Starts a Smart Meter Verification test
(5)
(1) Displayed only if Volume Flow Type = Liquid.
(2) Displayed only if Volume Flow Type = Gas.
(3) Available only if the petroleum measurement application is installed.
(4) Available only if the enhanced density application is installed.
(5) Applies only to systems with Smart Meter Verification.
Table 8-6 Event actions continued
ProLink II label Display label EDD label Description