Filter
Top Products
2 Micro Motion
®
Model 2400S Transmitters for PROFIBUS-DP
Before You Begin
1.4 PROFIBUS-DP functionality
The Model 2400S DP transmitter implements the following PROFIBUS-DP functionality:
• Baud rates: standard baud rates between 9.6 kbits/sec and 12.0 Mbits/sec, automatically
detected by transmitter
• I/O slave messaging:
- Data exchange
- Acyclic
• Configuration methods:
- Node address: hardware address switches or software addressing
- Device description (EDD) conforming to the following: Specification for PROFIBUS
Device Description and Device Integration: Volume 2: EDDL V1.1, January 2001
- DP-V1 read and write services with PROFIBUS bus parameters
• Operation methods:
- GSD conforming to the following: Specification for PROFIBUS Device Description and
Device Integration: Volume 1: GSD V5.0, May 2003
- DP-V0 cyclic services
- Device description listed above
- DP-V1 read and write services
• Identification and maintenance (I&M) functions:
-I&M 0
-I&M 1
as specified in Profile Guidelines Part 1: Identification & Maintenance Functions
Version 1.1.1, March 2005.
1.5 Determining version information
Table 1-1 lists the version information that you may need and describes how to obtain the information.
(Additional information is available via the I&M functions. See Section 7.2.)
Table 1-1 Obtaining version information
Component Tool Method
Transmitter software With ProLink II
View > Installed Options > Software Revision
With EDD
MMI Coriolis Flow > Configuration Parameters >
Device
With display
OFF-LINE MAINT > VER
ProLink II With ProLink II
Help > About ProLink II
GSD version Text editor Open file MMI0A60.GSD
Check parameter GSD_Revision
EDD version Text editor Open file MMICorFlowDP.ddl
Check parameter DD_Revision