Filter
Top Products
Hardware
2-21
Octel Overture 200/300 Serenade 3.0
PB60014–01
ROLM Integration Card (RIC)
The
ROLM Integration Card (RIC) is used with ROLM integrations. Refer to the
Integration
volume, ROLM Adaptive Integration chapter.
Northern Telecom SL-1 Integration Card (SLIC)
The
Northern T
elecom SL-1 Integration Card (SLIC) is used with Northern T
elecom SL-1 and
Meridian 1 integrations. Refer to the Integration
volume, SL-1 Adaptive Integration chapter
.
PIC Integration Card for AT&T (APIC)
The
APIC Integration Card is used with A
T&T System 75, System 85, and Definity PBX
integrations. W
ith APIC, the integration and line card functionality are combined on each port. The
APIC card is a 12-port COD card. The ports can be purchased in increments. Refer to the
Integration
volume, A
T&T System Adaptive Integration W
ith APIC chapter
.
PIC Integration Card for Northern Telecom (NPIC)
The
NPIC Integration Card is used with Northern T
elecom Meridian 1 or Meridian SL–1 PBX
integrations. W
ith NPIC, the integration and line card functionality are combined on each port. The
NPIC card is a 16-port COD card. The ports can be purchased in increments. Refer to the
Integration
volume, Northern T
elecom Adaptive Integration W
ith NPIC chapter
.
Mitel Integration Card (MIC)
The
Mitel Integration Card (MIC) is used with Mitel SX-200 Digital, SX-100/SX-200 Analog
and
SX-2000 S and SG integrations. Refer to the
Integration volume, Mitel Adaptive Integration chapter
.
Serial Integration Card for the Meridian 1 (SIC8)
The
Serial Integration Card (SIC8) is used with Northern T
elecom Meridian 1 PBX integrations.
Refer to the
Integration volume, Meridian 1 Adaptive Integration chapter
.
Voice Control Unit (VCU)
The
Voice Control Unit (VCU) manages the system/voice and voice disk drives. The VCU is
responsible for manipulating and controlling all voice data files. It controls the loopstart line
interface cards and preprocesses events from the LICs before passing the events to the CPU.
On the Octel Overture 200, the VCU is located in slot A8 and manages the system/voice and voice
disk drives in slots B2, B3, and B4.
On the Octel Overture 300, the VCU is located in slot A14 and manages the system/voice and voice
disk drives in slots B3, B4, and C1–C4.