Filter
Top Products
INSTALL
1-27
Octel Overture 200/300 Serenade 3.0
PB60014–01
Exiting and Continuing
If
you start INST
ALL and are interrupted, you can leave the program and continue later at the point
where you left of
f. The following example, starting at question 1.c), shows how
.
c) What is the SYSTEM ID number? (1–6 digits).
:555
d) How many (Overture 200/300) ports will be used? (1–8, empty line = 4)
:.E
EXITING INSTALL
WAIT...DONE
–––––––––––––––SYSTEM INSTALLATION SUSPENDED–––––––––––––
@
Later,
when you want to continue, type
INSTA
at the @ prompt, as shown.
@INSTA
–––––SYSTEM CONFIGURATION DIALOG–––––
DAY MM/DD HH:MM:SS YYYY SYSTEM NAME ID:000
You have an installation already in progress.
Do you wish to start over with a NEW INSTALLATION?
(Y/N, Empty line = NO, continue installation in progress)
:
d)How many ports will be used? (1–8, empty line = 4)
:
Begin
entering data where you left of
f.
Reinstalling
an Installed Octel Overture 200/300
After
the Octel Overture 200/300 is installed, situations could arise that warrant a reinstallation of
the message server such as the following:
-
The PBX has been replaced.
-
There were errors during INST
ALL. (Instituting a reinstallation might be more time-ef
ficient
than correcting major errors.)
-
The server has been upgraded to a lar
ger disk.
During a reinstallation, you can use the following options to:
-
Reinstall the Octel Overture 200/300, answering every question in the INST
ALL program.
-
Preload all the configuration tables from the backup configuration diskette.
-
Preload the specific range of tables.