Filter
Top Products
R
Quick Reference Guide
Octel
Overture 200/300
Maintenance Commands
Octel
Overture 200/300 Serenade 3.0
PB60014–01
Section InformationCommandSubject
Port
Mapping Status
PRTMAP
Displays information about the allocation of system
port numbers to ports configured in each slot.
T
one and DTMF
PRT x Monitors
and prints the tone and DTMF events
received for the port specified. To exit the monitor
mode, press .
x
= port number
.
Escape
Diagnostics
(continued)
Port Status
PS x Displays
current state of the ports.
x = non-zero for continuous (optional)
LAN Status
T DNET For
Digital Networking, to get a quick indication of
the general “health” of the configuration and
hardware at the local and remote cabinets.
SNMP Manager
System
T SNMP Tests
the mechanism for an Octel Overture 200/300
to communicate to an SNMP manager system.
Alarm T
est TE A Attempts
to call number defined for alarm call.
System Forwarding
CD x y z
or
TE C 1 y z
Forwards
all ports specified. Uses string from
System Parameter 45 —
SYSTEM RELOAD
FORWARD STRING
.
x
= slot number
y
= port number or first port in a range of ports
z
= port number of the last port in a range of ports
Floppy Disk Drive
TE F 1 Isolates
faults to the diskette, disk drive, or disk
controller.
System Initialization
CU x y z
or
TE C 2 y z
Initializes
and cancels forwarding for all ports
specified. Sends initialization string from System
Parameter 33 —
PBX INITIALIZE CODE,
then
cancels forward string from System Parameter 46
—
SYSTEM RELOAD CANCEL-FORWARD STRING.
x
= slot number
y
= port number or first port in a range of ports
z
= port number of the last port in a range of ports