Filter
Top Products
Installation
4-57
Octel Overture 200/300 Serenade 3.0
PB60014–01
6. From
telephone A, call out and back in on a trunk dedicated to the hunt group. When the Octel
Overture 200/300 answers, let the message server time out.
7.
Does the Octel Overture 200/300 transfer the call to the intercept position?
YES ' Continue.
NO '
Determine the cause and correct the problem before continuing.
Message
W
aiting Test
1. From
telephone A, call out and back in on a trunk dedicated to a Octel Overture 200/300 port.
2.
Does the Octel Overture 200/300 answer correctly?
YES ' Continue.
NO '
Determine the cause and correct the problem before continuing.
3.
Make sure that telephone C is busy
, by taking it of
f-hook. Enter the extension number associated
with telephone C.
4.
After a predetermined interval, the Octel Overture 200/300 should reconnect, and at telephone A you
should hear
,
“Extension XXX is busy
. Please leave a message at the tone, or enter another extension
number
, or pr
ess zer
o for assistance.”
5.
Leave a test message for telephone C.
.
A message is not delivered to a mailbox unless it is at least 4.5 seconds long. The mailbox
must be entered in the USER T
able for the Octel Overture 200/300 to of
fer to take a message.
6.
The Octel Overture 200/300 should now initiate a message-waiting-notification call (ASAP message
waiting) to the extension associated with telephone C.
.
If all ports are allowed to make outcalls, the call is not attempted when three-fourths or more
of the ports are being used. Also, for message waiting, INFORMA
TION T
able Index 12 —
MESSAGE W
AITING NOTIFICA
TION, must be set to Y
.
7.
Does the Octel Overture 200/300 call the extension associated with telephone C?
YES ' Continue.
NO '
Determine the cause and correct the problem before continuing.
8.
Answer telephone C. The Octel Overture 200/300 should respond with
“Extension XXX has X
messages. Ready
,”
or
“Extension XXX has X messages. Please enter your
security code.”
9.
Enter the security code, if asked, and press
5
to Listen to the test message.
10.
Does the message sound clear?
YES ' Continue.
NO '
Determine the cause and correct the problem before continuing.
11.
Press
3
to Erase the message, then press
9
to exit the mailbox. Does the Octel Overture 200/300
respond with
“X messages will be erased”
?
YES '
Press
9
to exit the message server
. The Octel Overture 200/300 should respond with
“good-bye.”
NO
'
Determine the cause and correct the problem.