Filter
Top Products
Log
Commands — Log, List Trace, Call Detail Record 7-7
Octel Overture 200/300 Serenade 3.0
PB60014–01
Table 7-1 T
race Activity T
ypes
Type Description
LAN_CTY Courtesy
operation (UP or DOWN specified in the EVENT field)
ONT_IN
An OctelNet (Protocol 5) packet received by server
ONT_OUT
An OctelNet (Protocol 5) packet sent out by server
ONT_ERR
An OctelNet (Protocol 5) protocol error occurred
NAM_DIR
Dial-by-Name directory activity
INTG_C
Card-based integration record, including MIC, RIC, A
TTIC, SL1, and M1 integrations
INTG_CA
Card-based ANI integration record
INTG_R
RS-232C integration record
INTG_D
DTMF integration record
LINK_AP
Application control processor link activity
AP
Application control processor mailbox activity (for example, message waiting)
CSP_IN
CSP_OUT
Packet received from the OctelAccess Server (Beginning with S3.0)
Packet sent to the OctelAccess Server
GWLINK_UP
GWLING_DOWN
Link between OctelAccess Server and the message server is up
Link between OctelAccess Server and the message server is down
ISDNMSG
Identifies activity associated with calls to a DTIC card.
INTGQRY
PBX query call record types
INTGREP
PBX reply call record types
- EVENT
.
Shows what action was taking place at that time. Refer to Appendix A at the end of this
chapter for a list of possible events.
-
AUX.
Shows supplemental event information. The
AUX
column also displays the digits entered for
an activity or a fax result code. For fax messages, the
AUX
column is empty if the fax was successful.
For applications routed through Octel Access, the
AUX column
displays the application session ID.
Server to the Refer to Appendix A in this chapter for a list of possible events and supplemental
actions that are logged, which includes a list of the fax result codes.
- MBX/EXTN.
Shows only the mailbox and the extension. The network location code is not shown in
this column. Instead, the network location name is shown in the SOURCE column.
For fax messages, this column shows the baud rate.
- MSG#.
Shows the message number
.
-
SL U L.
These three columns show the slot number
, the integration unit, and the link. For fax
messages, the
SL
column shows encoding type
MH
or
MR.
-
SOURCE.
Shows the source of the call (integration). This column shows the network-location name
for a network message.