Filter
Top Products
7-12
Installation and Maintenance
V
olume
Octel Overture 200/300 Serenade 3.0
PB60014–01
@L T 6
Enter start time : Year Month Day Hour Minute or C (continuous)
:
MM/DD/YY HH:MM:SS PRT TYPE EVENT AUX MBX/EXTN MSG# SL U L SOURCE
04/05/97 09:56:23 040 INTG_C FWD_INT BUSY 4373 09 1 4 1705
04/05/97 09:57:49 041 INTG_C DIR_EXT 800 10 1 1
04/05/97 9:57:54 040 INTG_C ONHOOK 09 1 4
04/05/97 09:58:16 043 INTG_C FWD_EXT NO_ANSWER 4334 10 1 3 100
Option 7, Aplink Activity
Select
7
to display W
orks for Serenade
system activity
. The activities displayed are as follows:
- LOST
. The data link between the Octel Overture 200/300 CPU and the W
orks for Serenade system is
down.
-
SYNC. The data link is restored.
Using the LOG PR CPT Command
You
can use the
LOG
command,
LOG PR CPT,
to display the same activities as are filtered with
LIST
TRACE.
W
ith the
LOG PR CPT
command, dif
ferent combinations of print options and filters can be specified to
consolidate information and focus the display on specific types of trace activities. Use
LOG PR CPT
to
do the following:
-
Set filter for records with
FAX_CHN
and
FAX_MSG.
-
Set start and end times for any trace.
-
Review timing and sequence of all high-level communication to and from the LAN for Digital
Networking.
T
o use the
LOG
command for CPT activities, at the @ prompt, type
LOG PR CPT
Enter
.
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5
Refer
to the Log Command section for an explanation of LOG print options.
In addition to the LOG print options that control the output format, you can enter specific filters and
ar
guments to limit the output to only those activities that match the set of search criteria. A filter need not
be specified and, in some cases, the filters can be partially specified. Only the values that match the
specified filters are displayed.