Filter
Top Products
Procedures
12-45
Octel Overture 200/300 Serenade 3.0
PB60014–01
Hard Disk Add
This
section provides the procedures to follow when adding a drive to a message server
. Adding a drive to a
message server is usually done to increase system storage or to add the optional redundancy feature.
Action Octel
Overture 200/300 Description and Response
The following message is printed.
CPU Model 300–6039–001 Rev 02F
486 Step 27 12MB
Testing Processor...PASSED
.
.
.
–––––– SYSTEM SOFTWARE RELEASE S.X.X.X (XX/XX/XX) ––––––
Copyright(c)
199X Octel Communications Corp.
All Rights Reserved.
TUE 11/08 08:44:58 19XX ID: S/N:000000 PBX:00
(Modem enabled) Last Logon : 00/00 00:00
@WAITING FOR VCU READY
SYSTEM INITIALIZATION SUSPENDED!
PASSWORD:
@
At
this point the Octel Overture 200/300 has completely booted from
floppy diskette.
Prepare
the System
1. Forward
ports.
Boot
the System
2. Make
sure software diskette #1
(for the correct release level) is
write-protected.
3.
Insert software diskette #1 (for
the correct release level) into
the floppy drive.
4.
Adjust the baud rate of the
terminal/teleprinter to 300, 1200
or 9600 baud.
5.
Press the Reload button to boot
from floppy diskette.
6.
When prompted, insert disk 2.