Filter
Top Products
Procedures
12-59
Octel Overture 200/300 Serenade 3.0
PB60014–01
Action Octel
Overture 200/300 Description and Response
The
following messages are printed:
CPU Model 300–6039–001 Rev 02F
486 Step 27 12MB
Testing Processor...PASSED
Testing System Voltage/Temp...PASSED
Testing ROM Checksum...PASSED
Testing PIT...PASSED
Testing DMA...PASSED
Testing UART...PASSED
Testing Modem...PASSED
Testing TDM Crosspoint...PASSED
Testing Floppy...PASSED
Testing RTC...PASSED
Testing BIC...PASSED
Testing OCC...PASSED
Testing WDT...PASSED
Testing Control Bus Interface...PASSED
Testing COMPLETED
Booting from floppy disk file XBOOT.IM
Image loaded
Loading Image from Floppy Disk
Loading file VMS1_2.IM
Please insert code floppy #2 & Press Return..
Loading file VMS2_2.IM
Image loaded
–––––– SYSTEM SOFTWARE RELEASE S.X.X.X (xx/xx/xx) ––––––
Copyright(c) 19xx Octel Communications
Corp
. All
Rights Reserved.
TUE 11/08 08:44:58 19xx ID: S/N:000000 PBX:00
(Modem enabled) Last Logon : 00/00 00:00
@WAITING FOR VCU READY
LOADING VCU WITH FILE F:VCU.IM
VCU STARTED
SYSTEM INITIALIZATION SUSPENDED!
PASSWORD:
@
When
the prompt SYSTEM INITIALIZA
TION SUSPENDED! appears,
the Octel Overture 200/300 has completely booted from floppy
.
The Octel Overture 200/300 requests a password.
.
If the above messages does not appear
, press the reload button and
reboot from floppy
.
T
o log on to the Octel Overture 200/300.
6.
Press the Reload button to boot
from floppy diskette.
When prompted, insert software
diskette #2 into the FD.
7.
Press twice.
Enter
8.
Enter the maintenance
password.
9.
Remove the software diskette
from the FD.