Filter
Top Products
R
Quick Reference Guide
Octel
Overture 200/300
Maintenance Commands
Octel
Overture 200/300 Serenade 3.0
PB60014–01
Section InformationCommandSubject
Integration Integration
Unit
CD x y Takes
the integration unit out of service.
x
= slot number
y
= unit number
CU x y Brings
the integration unit into service.
x
= slot number
y
= unit number
Integration
(continued)
Integration Unit
ISTAT x y Gives
the current status of an integration unit.
x
= slot number
y
= unit number
Integration Board
L INT x y Lists
the current state of the integration board, the
diagnostic status, and the status of the links, and
the pegs.
x
= slot number
y
= unit number
.
Incoming Call
Records
MON2
Used to monitor incoming call records over the
RS-232C link (port 2). T
o exit the monitor mode,
press .
Escape
MON2 H Show
call record data in hexadecimal values as it is
sent by the PBX.
Message W
aiting
Lamps
MWL RELITE Send
commands to relight each message waiting
lamp that the Octel Overture 200/300 has marked
as ON.
MWL RECALC Examines
each mailbox to determine whether its
message waiting lamp should be ON or OFF
.
MWOFF x Turns
OFF lamp message waiting.
x
= mailbox number
. The maximum number of
digits is eight. For ALL, enter
A.
L RT 1
C RT 1
List
round trip time for message waiting.
Clears round trip time for message waiting.