Filter
Top Products
Maintenance
Commands 6-15
Octel Overture 200/300 Serenade 3.0
PB60014–01
Command Basic Definition
T ON
The
Octel Overture 200/300 is reporting that a tone was received from the PBX
or central of
fice
. The number displayed is the actual time duration of the tone
received.
T OFF
The
Octel Overture 200/300 is reporting that no tone (silence) was received from
the PBX or central of
fice. The number displayed is the actual time duration that
no tone was present.
PRTMAP LIST PORT MAPPING
Lists
allocation of message server port numbers to ports configured in each slot,
and displays the allocation of each port to integration unit.
PS x PORT STATUS
Use
this command to print the status of all ports, where
x
is the non-zero for
continuous (optional) printing.
RESTA RESTART
Use this command to restart the CPU. All active ports and the modem are
dropped. With the
RESTA
command, the software is
not
reloaded from the hard
drive.
The maintenance-level password is requested before restart is initiated.
RESTA 2
RESTA 2
Use
this command to restart the CPU, which reloads software from the hard disk.
All active ports and the modem are dropped.
SDBG
Use this command to allow card integration trace information to be logged to the
message server
’
s call-processing trace log file.
T
o trace APIC and NPIC integrations, at the @ prompt enter
SDBG xx 1 FF yy
where
xx is the slot number and yy is either 7F to turn on debug or 00 to turn of
f.
T
o trace other integrations, at the @ prompt enter
SDBG xx yy ll zz
where
xx is the slot number
, yy is the unit number 11 is the link number
, and zz is
either 7F to turn on debug or 00 to turn of
f.
For example,
SDBG 2 1 2 7F
turns on debug for slot 2, unit 1, link 2.
TIME TIME
Use
this command to display the current message-server date and time.
. T
o change the date and time, use the UPDA
TE program. At the
.
(dot)
prompt, enter MODIFY DA
TE. the
Configuration
volume, Update chapter