Filter
Top Products
R
Quick Reference Guide
Octel
Overture 200/300
Maintenance Commands
Octel
Overture 200/300 Serenade 3.0
PB60014–01
Section InformationCommandSubject
Miscellaneous
(continued)
Patch
Status
PAT STAT This
command shows the status of all patches
currently applied on the message server, the patch
number
, the date the patch was applied and the
target(s).
Restart RESTA
Restarts the CPU. All active ports are dropped, and
the modem is dropped. The maintenance level
password must be entered before restart begins.
Restart RESTA 2 Restarts
the CPU. Reloads software from the hard
disk. All active ports are dropped, and the modem
is dropped.
Time TIME
Displays the current system date and time. Used
only at the @ prompt.
Network Failures
L NF Lists
Protocol 2 or Protocol 4 failures.
Refer to the
Networking
volume
—
REMOTE
ANALOG NETWORKING
chapter for details.
List Drive Map
L DMAP S3.0
Provides disk information report on the
physical characteristic of the disk drive.
VCU VCU
S3.0 Connects to the VCU. It provides detailed
drive status, drive configuration, message header
information on installed hardware. In addition,
from this command you can enter the
L DMAP
command
to get more details.
W
rite Protect Drive
WPDISK
S3.0 This command write protects a disk drive to
prevent any new messages from being created on
that drive.