11-2
Installation and Maintenance
V
olume
Octel Overture 200/300 Serenade 3.0
PB60014–01
11.2 INSTALLING
AND CONFIGURING THE LAN CARD
Only
one LAN card can be installed in the message server
. The LAN card can be installed in slots A5,
A6, or A7 for the Octel Overture 200 and slots A10, A1
1, or A12 for the Octel Overture 300.
The LAN card must be configured in the SLOTS T
able and certain system parameters might need to be
modified before the LAN card is installed.
Before installing the LAN card, configure the LAN card in the SLOTS T
able. Refer to the
Configuration
volume, Slots T
able chapter
.
SLOTS Table
When
adding the LAN card to the SLOTS T
able, enter 22 for the card type. The LAN card entry can also
be added in the INST
ALL program, question 3, or in
UPDATE,
with the
ADD SLOT command.
You
cannot configure more than one LAN card in the SLOTS T
able. Any attempt to add a second LAN
card results in the following error message:
LAN CARD ALREADY CONFIGURED IN SLOT n.
You
can install the LAN card in slots A5, A6, or A7 in the Octel Overture 200 and in slots A10, A1
1, or
A12 of Shelf A in the Octel Overture 300. The commands
MODIFY SLOT
and
DELETE SLOT
allow a
slot with card type 22 to be modified or deleted, respectively
.
Y
ou cannot modify or delete the LAN card entry in the SLOTS T
able when the LAN card is UP. Any
attempt to do so results in the following error message:
LAN is currently UP.
Please COURTESY DOWN the LAN board before doing this operation.