Filter
Top Products
Procedures
12-57
Octel Overture 200/300 Serenade 3.0
PB60014–01
Action Octel
Overture 200/300 Description and Response
The
Octel Overture 200/300 displays the following screen. (There may be
a delay before the screen appears.)
:B4
Selected drive has been replaced.
T
o reload the system.
T
o display the boot process.
Refer to
Installation,
Octel Overture 200/300 T
esting section, in this
volume.
T
o list the Hardware Error T
able.
If errors appear
, refer to the System Errors And T
raf
fic Peg chapter
.
14.
Enter the number of the drive
slot to be replaced.
Reload
the System
15. Make
sure the configuration
backup diskette is
write-enabled.
16.
Insert the configuration backup
diskette into the floppy drive.
17.
Press the lower button
on the CPU.
18. Press
Enter
19.
Log on to the system using the
maintenance password.
20. V
erify correct system operation.
21. @L H