Filter
Top Products
INSTALL
1-29
Octel Overture 200/300 Serenade 3.0
PB60014–01
Answering Y To Preload All Tables
When
preloading, all configuration tables are loaded. However
, if a feature has not been purchased
for the message server
, that table is not used.
@INSTA
SYSTEM HAS ALREADY BEEN INSTALLED.
Do you wish to RE–INSTALL? (Y/N, empty line = N)
<<IF YES, ALL TABLES WILL BE CLEARED AND USER MESSAGES WILL BE LOST>>
:Y
PASSWORD:
CLEARING ALL TABLES...DONE.
INITIALIZING ALL USER DIRECTORIES...DONE.
Do you wish to PRE–LOAD any tables from a previous INSTALL
from your DISKETTE? (Y/N, empty line = N)
:Y
Insert desired DISKETTE in drive. Press RETURN when ready...
PRE–LOAD ALL configuration tables?
:Y
Table PRELOAD COMPLETE.
1. SYSTEM PARAMETERS.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
2. USER.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
3. SLOTS.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
4. NETWORK ROUTES.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
5. NETWORK LOCATIONS.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
6. NETWORK NUMBERING PLAN.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
7. DISTRIBUTION LISTS.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
8. COS.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
9. INFORMATION Tables.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
10. SCHEDULE Table.
Table PRE–LOADED from disk. UPDATE if necessary when INSTALL is complete.
WARNING: FOR PROPER OPERATION SYSTEM MUST BE RESTARTED AFTER INSTALL:
INSTALL COMPLETE.
WAIT...DONE.
SAVE configuration to a DISKETTE? (Y/N, empty line = N).
:Y
You
must reload the Octel Overture 200/300 for it to operate correctly. At the @ prompt, enter
RESTA 2.
Make all UPDA
TE modifications after the message server has rebooted.