Filter
Top Products
Procedures
12-53
Octel Overture 200/300 Serenade 3.0
PB60014–01
Action Octel
Overture 200/300 Description and Response
@DISKO
CURRENT STATUS
Slot Type ID Status Configured
––––––––––––––––––––––––––––
B3 System1 S1 ACTIVE Configured
B4 System2 S2 ACTIVE Configured
C1 Voice 1 –– ACTIVE Not Configured
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
6. UPGRADE SYSTEM
Select option to be performed
(1–5 – Empty line = EXIT)
:2
Drive in slot C1 has been removed.
T
o reload the system.
Refer to the Installation chapter
, Octel Overture 200/300 T
esting section,
in this volume.
13.
Repeat the
DISKO
command
and again choose option 2 –
REMOVE DISK.
Reload
the System
14. Make
sure the configuration
backup diskette is
write-enabled.
15.
Insert the configuration backup
diskette into the FD.
16.
Press the lower button on the
CPU.
17.
Log on to the system using the
maintenance password.
18. V
erify correct system operation.