Filter
Top Products
6-8
Installation and Maintenance
Volume
Octel Overture 200/300 Serenade 3.0
PB60014–01
Command Basic Definition
CDFAX x y
CUFAX x y
CDINTG x y
CUINTG x y
The
following commands also can be used.
COURTESY DOWN FAX
Removes
the fax channel from service.
COURTESY UP FAX
Returns
the fax channel to service.
COURTESY DOWN INTEGRATION UNIT
Remove
the integration unit from service.
COURTESY UP INTEGRATION UNIT
Returns
the integration unit to service.
CDGWL [f] COURTESY DOWN GATEWAY LINK
Removes
the OctelAccess server link (gateway) from service. All new requests
from a remote OctelAccess server are rejected, and all current requests in
progress are finished before communication with the OctelAccess server is
stopped. A progress message is displayed. This command is also used to
re-initialize the OctelAccess link to recover from serious unexpected error
conditions. This courtesy down state is maintained across a reload and restart.
Only the
CUGWL
command can clear this state.
f = T
ype
f
to force the OctelAccess Server link to shutdown immediately
without waiting for in-progress requests or sessions to finish. (optional)
CUGWL COURTESY UP GATEWAY LINK
Returns
the OctelAccess linkn (gateway) to service.
The following commands are required before restoring prompts and system
configuration files and are recommended for all LAN Restore procedures. These
commands should also be used for backup procedures when information being
backed up could change as the procedure is being run.
SHUTDOWN SHUTDOWN
Use this command to put the message server in an of
f–line mode, removing ports,
fax cards, and integration units from service, and disabling digital and analog
networking, but without physically restarting or reloading the system or disabling
the LAN card.
⇒ Important:
Whenever
the
SHUTDOWN
command is used to put the server in an
of
f–line mode, the
STARTUP
command
must be used
to bring the
server back online. Even when the server is rebooted after a
SHUTDOWN
command, it is still necessary to issue the
STARTUP
command to initialize fax cards and the LAN card.
STARTUP STARTUP
Use this command to bring the message server back online, removing port
forwarding, enabling fax cards, integration units, and analog and digital network
messaging activity
.
Miscellaneous Commands
Use
these miscellaneous commands as described in the following: