Filter
Top Products
5-30
Installation and Maintenance
Volume
Octel Overture 200/300 Serenade 3.0
PB60014–01
The
total number of faxes successfully printed from all F
AX ports using
this COS. Includes fax delivery for fax messages and fax-on-demand
requests.
The number of ports using this COS that are busy at the same time and the
total number of seconds during the reporting period for which that number
of ports were busy
.
All
Port Statistics
Information
in this section includes the total number of incoming and outgoing calls for the message
server
, the number of seconds “n” ports were busy
, the number of seconds message waiting could not call
because too many ports were busy, and the number of seconds a fax call could not be made because too
many fax channels were busy
.
The total number of all incoming calls to the message server for the period
of time shown in the header of the report.
The total number of all outgoing calls from the message server for the
period of time shown in the header of the report. This includes on-site and
of
f-site message waiting, network messages sent, alarm calls, test network
calls, and fax delivery calls.
The total number of all faxes received for the period of time shown in the
header of the report.
The total number of all faxes printed for fax mail, fax overflow delivery
and fax-on-demand for the period of time shown in the header of the report.
If all ports make outcalls — the total number of seconds
3
/
4
or more of the
ports were busy
. If any ports do not allow outcall — the total seconds all
ports that do allow outcall
were busy
.
T
otal number of seconds a F
AX port was not available for fax delivery
outcall.
The number of VOC ports that are busy at the same time and the total
number of seconds during the reporting period for which that number of
VOC ports were busy
.
The number of F
AX ports that are busy at the same time and the total
number of seconds during the reporting period for which that number of
F
AX ports were busy
.
. T
o retain accuracy of the Port Statistics report, it is recommended
the report be listed and cleared before changing a port’
s COS in the
UPDA
TE program, or changing the number of ports in System
Parameter 4 — POR
TS USED. The System Performance and Port
Statistics reports are listed together in the
CLEAR REPORT
command.
Therefore, also list and clear the System Performance
report when listing and clearing the Port Statistics report.
NUMBER OF OUTGOING
FAXES
NUMBER OF PORTS
SIMULTANEOUSLY BUSY
TOTAL NUMBER OF
INCOMING CALLS
TOTAL NUMBER OF
OUTGOING CALLS
TOTAL NUMBER OF
INCOMING FAXES
TOTAL NUMBER OF
OUTGOING FAXES
SECONDS TOO MANY
PORTS BUSY TO MAKE
OUTCALLS
SECONDS TOO MANY
PORTS BUSY TO MAKE
FAX DELIVERY
NUMBER OF VOICE PORTS
SIMULTANEOUSLY BUSY
NUMBER OF FAX PORTS
SIMULTANEOUSLY BUSY