Filter
Top Products
Maintenance
Commands 6-1
Octel Overture 200/300 Serenade 3.0
PB60014–01
6.1 COMMAND
SUMMAR
Y
Maintenance
commands for the Octel Overture
t
200/300 message server are entered from the @ prompt.
In this chapter
, the maintenance commands are divided into five command types:
-
List commands
-
Clear commands
- T
est commands
-
System service mode commands
-
Miscellaneous commands
The basic command input is listed in
BOLD
letters, in the left column. The complete command name is in
bold in the right column. In some instances, a modifier and extension might be required to complete the
command string. Y
ou must press
Enter
following all command strings before the message server
executes the command.
The message server indicates that it is ready to receive information by displaying the @ prompt. For
example, to list the Hardware Error T
able, at the
@
prompt, type
L H
Enter
List Commands
Use
a
LIST
command to display maintenance tables, such as the Hardware Error T
able or T
raf
fic Peg
Count T
able, features, and mailbox information. A space is always required between the
L (for LIST)
and the letter following. At the @ prompt type
L [name]
Enter
Command Basic Definition
L CCM LIST CCM (Serenade 3.0)
Displays
the current message server utilization for the Client Controlled
Message pool (CCM). This command is used for OctelAccess application
development.
L C LIST CLERR (Serenade 3.0)
Used
for OctelAccess troubleshooting. Lists the client error log that shows
errors that are caused by invalid client requests. The error log contains all
relevant information required to isolate the source of the error
.
L F LIST FEATURES
Prints
the optional packages installed on the Octel Overture 200/300. Lists
the maximum number of ports, drives, SCHEDULE T
able entries, and
mailboxes.
L H LIST HARDWARE
Lists
the Hardware Error T
able.
L HE x LIST HEADER
Lists
the status of a message, where
x
is the message number
.