Filter
Top Products
R
Quick Reference Guide
Octel
Overture 200/300
Hardware
Octel
Overture 200/300 Serenade 3.0
PB60014–01
Octel
Overture 200 Message Server Specifications (continued)
–200
to 10,000 feet (–61 to 3,048 meters)
–200 to 40,000 feet (–61 to 12,192 meters)
–200 to 10,000 feet (–61 to 3,048 meters)
0.1 g
Equipment room or of
fice
No special requirements
22 inches (55.9 cm)
6 inches (15.2 cm)
1 inch (2.5 cm)
1 inch (2.5 cm)
Maximum 500 watts (1706 Btu per hour) per cabinet, each cooled with
two internal, 4-inch (10.2-cm) fans
2-wire, 2500-type; 2-wire, DID-type, optional
50-pin telco, four ports per connector with 4-port LIC, eight ports per
connector with 8-port LIC, twelve ports per connector with 12-port ILC12,
and sixteen ports per connector with 16-port DLC16, rear access, and
sixteen ports per DAC I/O panel (four
-port DAC)
RS-232C, auto-baud-rate select, DB25, 300–19,200 bps
RS-232C, 1200 bps, DB25
300/1200/2400 baud; Bell 103/212A and CCITT V
.22/CCITT V
.22 bis,
one per cabinet, accessible from any telephony port
Four RS-232C (2 DB9, 2 DB25) ports, rear access
DB9, rear access
Environmental Requirements (continued)
Altitude
Operating
Nonoperating, transit
Nonoperating, storage
Vibration, operational at
22–500 Hz
Installation Environment
Flooring
Cabinet Clearance
Front
Rear
Sides
Top
Heat Dissipation
Interfaces
T
elephone Ports
Port Connector
System Serial Port
RS-232C Integration Port
Internal Modem
W
orks Serial Ports
Alarm Relay