Filter
Top Products
11-4
Installation and Maintenance
V
olume
Octel Overture 200/300 Serenade 3.0
PB60014–01
System
Parameter
Description
and Use
235
LAN: SNMP MANAGER IP ADDRESS
The
IP address of the SNMP manager
’
s PC/workstation, which must be of the form
M.N.O.P
, where M = 1–223; N and O = 0–255, and P = 1–254.
236 LAN:
SNMP MANAGER HOST aSCII NAME
The
host name of the SNMP manager
’
s PC/workstation, which can be up to 31
alphanumeric characters long.
237 LAN:
SNMP LOCA
TION OF VOICE MAIL CABINET
The
location is a descriptive field that specifies the location of the Octel Overture
200/300, which can be up to 31 characters.
238 LAN:
SNMP NAME OF SYSTEM CONT
ACT
The
name of the person who needs to be contacted in case of network trouble with
the Octel Overture 200/300 (that is, the Octel Overture 200/300 system
administrator). Also, include the person’
s phone number
, if known. The name can
be up to 31 characters long.
239 LAN:
SNMP READ COMMUNITY
The
read community that can only access SNMP data. This is a password that
provides read-only access to the SNMP manager, which can be up to 19 characters
long.
240 LAN:
SNMP READ WRITE COMMUNITY
The
read-write community that can access and modify SNMP data. This is a
password that provides read/write access to the SNMP manager, which can be up
to 19 characters long.
242 LAN:
SEND TRAP T
O THE SNMP MANAGER ON ALARM
If
this parameter is set to Y
es and if the SNMP manager IP address (or manager
name if a name server is configured) is configured, the CPU will generate an
SNMP trap request to the LAN card, whenever a hardware error is logged a
suf
ficient number of times for its priority to cause an alarm call. The default is No.