Filter
Top Products
INSTALL
1-23
Octel Overture 200/300 Serenade 3.0
PB60014–01
10. SCHEDULE TABLE.
– – – SCHEDULE FOR COS 10 – – –
TIME PERIOD 1:
Enter INFORMATION TABLE number to use. (1–255)
Enter empty line when done.
:
Enter applicable WEEKDAYS as: SU,MO,TU,WE,TH,FR,SA,HOL
(Empty line = MO,TU,WE,TH,FR)
:
Enter START time as: HOURS (00–23): MINUTES (00–59)
(Empty line = 00:00)
:
Enter STOP time as: HOURS (00–23): MINUTES (00–59)
(Empty line = 23:59)
:
TIME PERIOD 2:
Enter INFORMATION TABLE number to use. (1–255)
Enter empty line when done.
:
When
you are finished entering all time periods for the SCHEDULE T
able, press
Enter
at the
colon. The message server prompts for the default INFORMA
TION T
able number
.
Enter the DEFAULT INFORMATION TABLE number to use outside the
TIME PERIODS specified for COS 10 . (1–255)
INSTALL COMPLETE.
WAIT... DONE.
SAVE configuration to a DISKETTE? ( Y/N , empty line = N ).
:
WARNING: FOR PROPER OPERATION SYSTEM MUST BE RESTARTED AFTER INSTALL!
DAY MM/DD/YYYY HH:MM:SS SYSTEMNAME ID:XXXXXX S/N:XXXXXX PBX:00
–––––––– SYSTEM INSTALLATION COMPLETED ––––––––
@
Save
the configuration on your backup configuration diskette. Leave the diskette in the disk drive.
The Octel Overture 200/300 must be reloaded for to operate correctly
. T
o reload the Octel Overture
200/300, at the @ prompt, enter
RESTA 2
Enter
After
the message server has reloaded, it is recommended that you enter the UPDA
TE program and
use the
LIST
command to review the answers you just entered. Y
ou might also need to change some
of the system parameter values. Refer to the
Configuration
volume, System Parameter T
able chapter
,
in this volume.
Use the UPDA
TE program to modify system parameters and to set COS Attributes.