Filter
Top Products
12-54
Installation and Maintenance
Volume
Octel Overture 200/300 Serenade 3.0
PB60014–01
Hard Disk Replace
These
procedures provide the steps to replace a hard disk drive on a message server configured with multiple drives.
.
When doing the Hard Disk Replace procedures, make sure that the diskettes being used are for the correct
release level.
Action Octel
Overture 200/300 Description and Response
Hard
disks may be hot plugged.
Prepare
the System
1. Forward
ports.
2.
Remove the hard disk(s)
to be replaced.
Boot
the System
3. Make
sure the software diskette
#1 (for the correct release level)
is write-protected.
4.
Insert software diskette #1 (for
the correct release level) into
the FD.
5.
Adjust the baud rate of the
terminal/teleprinter to 300,
1200, or 9600 baud.
6.
Press the Reload button to boot
from floppy diskette.