Filter
Top Products
DMA Operations Guide Local Cluster Configuration Procedures
74 Polycom, Inc.
6 Click OK.
The system processes the configuration. The Status field shows the
current H.323 signaling state.
See also:
“Signaling Settings” on page 67
Configure Logging
To configure logging
1 Go to Admin > Local Cluster > Logging Settings.
2 Change Rolling frequency and Retention period as desired.
3 If requested to do so by Polycom support, change Logging level.
4 Click Update.
A dialog box informs you that the configuration has been updated.
5 Click OK.
See also:
“Logging Settings” on page 70