Filter
Top Products
DMA Operations Guide Conference Templates
194 Polycom, Inc.
Video switching (VSW) Enables a special conferencing mode that provides HD
video while using MCU resources more efficiently. All
participants see the current speaker full screen (the
current speaker sees the previous speaker).
If this mode is enabled:
• The minimum line rate available is 768 kbps (except
for SD resolution, available only on RMX v7 MCUs
with MPM+ or MPMx cards).
• All endpoints must connect at the same line rate,
and those that don’t support the specified line rate
are connected in voice-only mode.
• The video clarity, layout, and skins settings are not
available.
• LPR is automatically turned off, but can be turned
back on.
If this option is off, conferences using this template are
in Continuous Presence (CP) mode, in which the MCU
selects the best video protocol, resolution, and frame
rate for each endpoint according to its capabilities.
H.264 high profile Sets a VSW conference to use Polycom’s
bandwidth-conserving H.264 High Profile codec
(previously supported only in continuous presence
mode).
If this is selected, all endpoints in the conference must
support High Profile. Endpoints not connecting at the
conference's exact line rate and resolution are
connected in audio-only mode. Available only on RMX
v7.6 or later MCUs with MPMx cards.
Resolution Available only if Video switching is selected. Offers the
following resolution settings:
• H.264 720p30
• H.264 1080p30 (available only on RMX MCUs with
MPM+ or MPMx cards)
• H.264 SD 30 (available only on RMX v7 MCUs with
MPM+ or MPMx cards)
• H.264 720p60 (available only on RMX v7 MCUs
with MPM+ or MPMx cards)
• H.264 CIF (available only on RMX v7 MCUs)
• H.263 CIF (available only on RMX v7 MCUs)
• H.261 CIF (available only on RMX v7 MCUs)
• HD_720_P_30
Table 8-4 Edit Conference Template dialog box (continued)
Field Description