Filter
Top Products
Site-to-Site Exclusions Site Topology
Polycom, Inc. 281
See also:
“About Site Topology” on page 263
“Site Links” on page 279
“Site Topology Configuration Procedures” on page 287
Site-to-Site Exclusions
The Site-to-Site Exclusions page contains a list of the site-to-site connections
that the site topology doesn’t permit a call or session to use.
If the system is integrated with a Polycom RealPresence Resource Manager or
CMA system, it receives this information from that system, and this page is
read-only. If not, you can define exclusions.
The commands in the Actions list let you add a site-to-site exclusion and delete
existing exclusions.
The following table describes the fields in the list.
See also:
“About Site Topology” on page 263
“Add Site-to-Site Exclusion Wizard” on page 281
“Site Topology Configuration Procedures” on page 287
Add Site-to-Site Exclusion Wizard
Lets you define a new site-to-site exclusion in the Polycom DMA system’s site
topology.
To add a site-to-site exclusion
1 Go to Network > Site Topology > Site-to-Site Exclusions.
2 In the Actions list, click Add.
Table 11-10 Information in the Site-to-Site Exclusions list
Column Description
From/To Site Name of one of the two sites connected by the excluded
link.
To/From Site Name of the other site.