Filter
Top Products
DMA Operations Guide MCUs
134 Polycom, Inc.
8 If the call fails because of no capacity on the selected gateway, select the
next gateway left in 7. If none, start again at 1 (omitting the gateway that
failed). If none left, reject the call.
MCU Procedures
To view information about an MCU
1 Go to Network > MCU > MCUs.
The MCUs list appears.
2 In the list, select the MCU and in the Actions list, click View Details.
The Device Details dialog box appears, displaying detailed information
about the MCU.
To add an MCU
1 Go to Network > MCU > MCUs.
2 In the Actions list, click Add.
3 In the Add MCU dialog box, complete the editable fields. See “Add MCU
Dialog Box” on page 125.
4 To set aside some of the MCU’s capacity for the Polycom CMA system’s
use, set Video ports reserved for CMA system and Voice ports reserved
for CMA system to the desired values (requires RMX v6.0 and above).
The ports reserved for the Polycom CMA system can be used by that
system for scheduled conferences.
5 To use a gateway-capable MCU as an ISDN gateway, select the Enable
gateway profiles check box and, on the Gateway Profiles tab, specify a
dial string delimiter and add one or more session profiles.
Note
See all the notes in “MCUs” on page 119.
Note
This feature is not for use with a Polycom RealPresence Resource Manager
system. The RealPresence Resource Manager system must have exclusive use of
any MCUs on which it directly schedules conferences. Those MCUs should not be
added to the DMA system’s conferencing resources.