Filter
Top Products
DMA Operations Guide Resource Management System Integration
172 Polycom, Inc.
The following table describes the fields in the dialog box.
See also:
“Integrations with Other Systems” on page 147
“Resource Management System Integration” on page 169
“Resource Management System Page” on page 170
“Resource Management System Integration Procedures” on page 172
Resource Management System Integration Procedures
To integrate with a resource management system
1 Go to Admin > Integrations > Resource Management System.
2 In the Actions list, select Join Resource Management System.
3 In the Join Resource Management System dialog box, enter the host
name or IP address of the Polycom RealPresence Resource Manager or
CMA system and the credentials with which to log into it. Then click OK.
Table 7-4 Fields in the Join Resource Management System dialog box
Field Description
Host name or IP
address
The Polycom RealPresence Resource Manager or
CMA system with which to integrate.
User name Administrative user ID with which the Polycom DMA
system can log into the Polycom RealPresence
Resource Manager or CMA system.
Password Password for the administrative user ID.
Note
RealPresence Resource Manager or CMA integration is not supported in
Maximum security mode. See “The Consequences of Enabling Maximum Security
Mode” on page 52.
Note
Your DNS servers must be able to resolve the Polycom DMA system’s FQDN to its
virtual IP address. See “Add Required DNS Records for the Polycom DMA System”
on page 22.
In addition, the DNS servers must be able to resolve the Polycom RealPresence
Resource Manager or CMA system’s FQDN to its IP address. This is necessary
even if you specify the Polycom RealPresence Resource Manager or CMA
system’s IP address when you join it.