Filter
Top Products
Licenses Local Cluster Configuration
Polycom, Inc. 67
Licenses
The Polycom DMA system is licensed for the number of concurrent calls it can
handle and optionally for API access. See “License the Polycom DMA System”
on page 24 for more information about licensing.
The following table describes the fields on the Licenses page.
See also:
“Local Cluster Configuration” on page 61
“Local Cluster Configuration Procedures” on page 71
Signaling Settings
On the Signaling Settings page, you can configure H.323, SIP, and XMPP
signaling.
H.323 and SIP Signaling
If H.323 signaling is enabled, the Polycom DMA system’s Call Server operates
as a gatekeeper, receiving registration requests and calls from H.323 devices.
If SIP signaling is enabled, Call Server operates as a SIP registrar and proxy
server, receiving registration requests and calls from SIP devices. If both are
enabled, the system automatically serves as a SIP <–> H.323 gateway.
Table 4-4 Fields on the Licenses page
Field Description
Active License
Licensed calls The maximum number of concurrent calls that the
license enables.
Licensed capabilities Currently, the only separately licensed capability is
access to the RealPresence Platform API.
Activation Keys
A two-server cluster has two sets of the fields below, one for each server in the
cluster.
System serial number The serial number of the specified server.
Activation key The activation key you received from Polycom for this
server. The key for each server must be the correct one
for that server’s serial number.