Filter
Top Products
External SIP Peer Device Management
Polycom, Inc. 113
See also:
“External SIP Peer” on page 96
“Add External SIP Peer Dialog Box” on page 97
“Edit External SIP Peer Dialog Box” on page 102
Edit Outbound Registration Dialog Box
Some external SIP peers require peer proxies to register with them as an
endpoint does, using a REGISTER message. The Edit Outbound Registration
dialog box lets you edit the selected outbound registration configuration.
The following table describes the fields in the Edit Outbound Registration
dialog box.
Password
Confirm password
The password to use for the authentication credentials if
the external peer challenges the registration request.
Request-URI The Request-URI to include when registering with this
SIP peer, specified using the variables (#delimited)
defined in “Free Form Template Variables” on page 109.
Other headers Additional headers to include when registering with this
SIP peer.
Click Add to add a header. In the Add Header dialog
box, specify the header name and value(s), using the
variables (#delimited) defined in “Free Form Template
Variables” on page 109.
Click Edit or Delete to edit or delete the selected
header.
Table 5-21 Add Outbound Registration dialog box
Field Description
Table 5-22 Edit Outbound Registration dialog box
Field Description
Enabled Clearing this check box lets you stop using this
registration without deleting the registration information.
Address of record The AOR with which the system registers (see
registration rules in RFC 3261), such as:
sip:1000@dma.polycom.com
Territory to perform
registration
Responsibility for registering must be assigned to a
territory, thus making the primary or backup DMA
cluster for the territory responsible, depending on which
is active.