Filter
Top Products
Dashboard System Management and Maintenance
Polycom, Inc. 335
See also:
“Dashboard” on page 331
Conference Manager Usage Pane
Displays usage information for Conference Manager, either for all Conference
Manager clusters or for the selected cluster.
The information shown includes the territories for which Conference Manager
is enabled, the number of conferences and participants, the port usage, and the
number of local users and custom conference rooms.
See also:
“Dashboard” on page 331
Exchange Server Integration Pane
If the Polycom DMA system is integrated with a Microsoft Exchange server
(see “Microsoft Exchange Server Integration” on page 164), displays the
following:
• The integration status, which can be one of the following:
—Unavailable — A service status or inter-server communication
problem prevented determination of the integration status.
—Error — The system was unable to establish a connection to the
Exchange server. This could be a network or Exchange server
problem, or it could be a login failure.
— Awaiting Active Directory — The system isn’t integrated with the
Active Directory, required for Exchange server integration.
— Primary SMTP mailbox not found — The mailbox configured for the
Polycom DMA system isn’t in the system’s Active Directory cache.
— Subscription pending — The Polycom DMA system has asked the
Exchange server to send it notifications and is waiting to receive its
first notification to confirm that the Exchange server can communicate
with the system. If this status persists for more than a minute or so,
there is likely a configuration problem (such as an invalid certificate or
the Exchange server is unable to resolve the DMA system’s FQDN).
Note
An MCU may be connected to up to three Conference Manager clusters. If one of
the three Conference Managers loses its connection to the MCU, this is counted as
0.33 disconnects. If all connections to the MCU are lost, this is counted as 1
disconnect.