Filter
Top Products
Conference Templates Conference Manager Configuration
Polycom, Inc. 197
RMX Video Settings
Presentation mode Enables a conference to change to lecture mode when
the current speaker speaks for 30 seconds. When
another participant starts talking, it returns to the
previous video layout.
Not available if Video switching or Same layout is
selected, or if Telepresence mode is Yes.
Send content to legacy
endpoints
Enables endpoints that don’t support H.239 to receive
the Content channel over the video (People) channel.
Available only on MCUs with MPM+ and MPMx cards.
Not available if Video switching or Same layout is
selected, or if Telepresence mode is Yes.
Same layout Forces the selected layout on all participants. Personal
selection of the video layout is disabled.
Not available if Presentation mode or Video switching
is selected, or if Telepresence mode is Yes.
Lecturer view switching When in lecture mode, enables the lecturer’s view to
automatically switch among participants (if the number
exceeds the number of windows in the layout) while the
lecturer is talking.
Not available if Same layout is selected or
Telepresence mode is Yes.
Auto layout Lets the system select the video layout based on the
number of participants in conference. Clear the check
box to select a specific layout (below).
Not available if Video switching is on or Telepresence
mode is Yes.
Layout With Auto layout deselected, this opens the Select
Layout dialog box, where you can select the number
and arrangement of video frames. Once a layout is
chosen, a small representation of it appears here. See
“Select Layout Dialog Box” on page 201.
Not available if Video switching is on.
Table 8-4 Edit Conference Template dialog box (continued)
Field Description