Filter
Top Products
Groups Users and Groups
Polycom, Inc. 317
b To link this preset conference to an external audio conferencing
bridge, in the Digits field enter the E.164 number for connecting to
that bridge, and in the IVR DTMF field enter any DTMF digits (such
as an access code or PIN) to send to the audio conferencing bridge
after connecting (use p to specify a pause).
This capability requires an RMX MCU with ISDN service.
c Under Dial-out Participants, add the participants to be called when
the conference starts.
6 To turn of automatic dial-out temporarily without losing the
configuration data, clear the Dial-out Presets check box.
7 Click OK.
To delete one of a user’s custom conference rooms
1 Go to User > Users and select the user whose custom conference room
you want to delete.
2 In the Actions list, click Manage Conf Rooms.
The Conference Rooms dialog box appears.
3 Select the conference room you want to remove and click Delete.
You can’t delete an enterprise conference room or a conference room
created by the system for a calendared meeting.
4 When prompted to confirm, click Yes.
See also:
“Users” on page 294
“Conference Rooms Dialog Box” on page 303
“Add Conference Room Dialog Box” on page 305
“Edit Conference Room Dialog Box” on page 309
“Users Procedures” on page 313
Groups
Groups functionality is available only if your Polycom DMA system is
integrated with an Active Directory. User groups are defined in your Active
Directory and imported into the Polycom DMA system from there.