Filter
Top Products
DMA Operations Guide Alerts
350 Polycom, Inc.
This could be a problem with the GB1 port (eth0 interface), the ethernet cable
connecting the server to the enterprise network switch, or that switch. Or the
server in question may just need to be rebooted.
See also:
“Alerts” on page 338
Alert 3305
Cluster <cluster>: A signaling network error exists on <server>.
The specified server has detected a problem with the signaling network
connection.
This could be a problem with the GB3 port (eth2 interface), the ethernet cable
connecting the server to the enterprise network switch, or that switch. Or the
server in question may just need to be rebooted.
See also:
“Alerts” on page 338
Alert 3401
Cluster <cluster>: Available disk space is less than 15% on server <server>.
The specified cluster is running out of disk space.
Suggestions for recovering and conserving disk space include:
• Delete backup files (after downloading them).
• Remove upgrade packages.
• History data is written to the backup file nightly. Reduce history retention
settings so the same history data isn’t being repeatedly backed up.
• Roll logs more often (compressing the data) and make sure Logging level
is set to Production.
See also:
“Alerts” on page 338
Alert 3402
Cluster <cluster>: Old log files on server <server> will be purged within
<timeframe>.
Log archives on the specified cluster are approaching the retention limit set on
the Logging Settings page.